rest id and password

Discussion in 'HP' started by bjlamb, Nov 9, 2011.

  1. bjlamb

    bjlamb Guest

    how to get to administrator rights to rest id and password on hp712p
    unix box
     
    bjlamb, Nov 9, 2011
    #1
    1. Advertisements

  2. bjlamb

    Robert Baer Guest

    Try booting with a system disk and use the dumb obvious tries:
    "admin", "aministrator", etc. where id and psw are the same.
     
    Robert Baer, Jan 30, 2012
    #2
    1. Advertisements

  3. [comp.sys.hp.hpux added and followup set.]


    UNIX doesn't have the concept of "administrator rights", but does have
    the concepts of "super user" (root) and "single-user boot". A
    single-user boot per definition gives you super user access.

    To perform a single-user boot:

    - Boot the system and when its says you can press ESC, do so.
    - You get the firmware boot menu. Do "b p0 isl".
    - You should get a "ISL> " prompt. If so, type "hpux -is".
    - You should get a "# " root prompt.

    If the "hpux -is" fails, then let the system boot normally and note
    the string such as for example "Booting disk(scsi.6;0x0)/hp-ux" (or
    ".../stand/vmunix"). Now boot again to the "ISL> " prompt, and add the
    part after "Booting" to the "ISL> hpux -is" command, i.e. for example
    "ISL> hpux -is disk(scsi.6;0x0)/hp-ux".
     
    Frank Slootweg, Jan 30, 2012
    #3
  4. bjlamb

    alexstone

    Joined:
    Dec 23, 2013
    Messages:
    9
    Likes Received:
    0
    Try to type sudo su in command promt
     
    alexstone, Dec 24, 2013
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.