S2567 & SCSI BIOS

Discussion in 'Tyan' started by Christoph Gartmann, May 31, 2005.

  1. Hello,

    we have a Tyan Thunder HEsI (S2567) and would like to install a SCSI boot disk.
    The computer ran fine with an IDE drive and hence SCSI was disabled in BIOS.
    Now we removed the IDE drive and installed a brand new SCSI drive, enabled
    SCSI in BIOS and rebooted. We don't get any LSI SCSI BIOS message,
    Win-NT-Installation doesn't see the drive and crashes when we add a driver
    via F6 ("inaccessible boot-device). If we boot from the IDE drive (Win-NT)
    with the driver for the LSI 53C1010 installed we have access to the new SCSI
    drive without any problem. Obviously there is a problem with the SCSI BIOS.
    We reflashed BIOS with version 1.05a, still no luck. What is wrong here?
    How does one enable SCSI BIOS?

    Regards,
    Christoph Gartmann

    --
    Max-Planck-Institut fuer Phone : +49-761-5108-464 Fax: -452
    Immunbiologie
    Postfach 1169 Internet: [email protected] dot mpg dot de
    D-79011 Freiburg, Germany
    http://www.immunbio.mpg.de/home/menue.html
     
    Christoph Gartmann, May 31, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.