Sata Drives not recognized

Discussion in 'Abit' started by RB1, Jan 31, 2014.

  1. RB1

    RB1

    Joined:
    Jan 31, 2014
    Messages:
    1
    Likes Received:
    0
    Running ABIT IC7-G motherboard for about 6 years. Began having DVD/CDRom problems with plextor drive. Unable to see drive in windows MyComputer, drive not recognized by device manager, unable to add device.

    Replaced plextor with ASUS DVD/CDRom. Same problem. Connected both drives as Sata1 & 2. In BIOS, both plextor and ASUS are recognized (as as IDE device 3 and 4 masters). In windows...nothing.

    BIOS has been cleared w/Lithium battery remved. ON-CHIP IDE and On-CHIP PCI setting are configured coreectly to enable SATA1/2.

    Stumped...
     
    RB1, Jan 31, 2014
    #1
  2. RB1

    KatjanoTheElder

    Joined:
    Feb 17, 2014
    Messages:
    2
    Likes Received:
    0
    Location:
    Namibia, Okahandja
    Have you tried flashing the BIOS? It helps sometimes...
     
    KatjanoTheElder, Feb 18, 2014
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SATA drive not detected after installing 2 IDE drives

  2. System will not boot the SATA drives

  3. Video card not recognized

  4. Help needed-dual monitor/2nd video card not recognized - Dell

  5. My video card is not being recognized

  6. ITB HD Not Recognized

  7. ITB HD Not Recognized

  8. Compaq Prosignia 200 doesn't detect IDE Hard Drives and DVD Drives

Loading...