1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

sccli command on A3310 gives scsi errors

Discussion in 'Sun Hardware' started by Robert-Jan Oosterloo, Apr 9, 2004.

  1. Hi all,

    We have 2 new A3310s connected to 2 V440s. The systems or storage are
    not connected to eachother. But as soon as we run the 'sccli' command,
    we get the following errors and access to the A3310 is blocked for about
    a minute. This happens on both systems. Is anyone else seeing this? This
    was escalated to Sun as a P1 case. But after a few days, Sun was not
    able to fix the problem and the only "solution" is to just don't run the
    command and also disable the part of Explorer that uses this command to
    get info about the A3310s. Same thing goes for Storade. We are not
    supposed to use that anymore as it uses the sccli command as well.
    Sun has convinced our management that this is not a problem and that the
    case can be closed. But obiously, as administrators, we are very unhappy
    about this.

    But is anyone having the same errors with this setup?

    Thanks!

    Best regards,
    Robert-Jan

    Apr 8 14:47:42 maildbp1 scsi: [ID 107833 kern.warning] WARNING:
    /pci@1d,700000/
    pci@1/scsi@5/sd@0,1 (sd95):
    Apr 8 14:47:42 maildbp1 scsi: [ID 107833 kern.warning] WARNING:
    /pci@1d,700000/
    pci@1/scsi@5/sd@0,1 (sd95):
    Apr 8 14:47:42 maildbp1 SCSI transport failed: reason 'reset':
    retrying
    command
    Apr 8 14:47:42 maildbp1 SCSI transport failed: reason 'reset':
    retrying
    command
    Apr 8 14:47:42 maildbp1 scsi: [ID 107833 kern.warning] WARNING:
    /pci@1d,700000/
    pci@1/scsi@5/sd@0,2 (sd96):
    Apr 8 14:47:42 maildbp1 scsi: [ID 107833 kern.warning] WARNING:
    /pci@1d,700000/
    pci@1/scsi@5/sd@0,2 (sd96):
    Apr 8 14:47:42 maildbp1 SCSI transport failed: reason 'reset':
    retrying
    command
    Apr 8 14:47:42 maildbp1 SCSI transport failed: reason 'reset':
    retrying
    command
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.warning] WARNING:
    /pci@1d,700000/
    pci@1/scsi@5/sd@0,2 (sd96):
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.warning] WARNING:
    /pci@1d,700000/
    pci@1/scsi@5/sd@0,2 (sd96):
    Apr 8 14:47:45 maildbp1 Error for Command: write(10)
    Error
    Level: Retryable
    Apr 8 14:47:45 maildbp1 Error for Command: write(10)
    Error
    Level: Retryable
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.notice] Requested Block:
    9176648
    Error Block: 9176648
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.notice] Requested Block:
    9176648
    Error Block: 9176648
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.notice] Vendor: SUN

    Serial Number: 55DA14FE-00
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.notice] Vendor: SUN

    Serial Number: 55DA14FE-00
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.notice] Sense Key: Unit
    Attentio
    n
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.notice] Sense Key: Unit
    Attentio
    n
    Apr 8 14:47:45 maildbp1 scsi: [ID 107833 kern.notice] ASC: 0x29 (power
    on, res
    et, or bus reset occurred), ASCQ: 0x0, FRU: 0x0
     
    Robert-Jan Oosterloo, Apr 9, 2004
    #1
    1. Advertisements

  2. some things that might help:

    - install latest 3310 firmware (3.27?!?)
    - install the latest patches for solaris, the SUNWquos driver
    and for the sccli tool
    - update the obp on the v440

    hth
    Rafael
     
    Rafael Imelmann, Apr 9, 2004
    #2
    1. Advertisements

  3. Hi Rafael,

    Thanks for the suggestions. But Sun has done all that, unfortunately, to
    no avail.

    Robert-Jan
     
    Robert-Jan Oosterloo, Apr 9, 2004
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.