ST6R & CPU Burn

Jerry Polyak · Jul 22, 2003

Hi,

Running ST6R
Cel 1.3 @120 = 1560 MHz
256 MB Crucial RAM
GF3TI 500
SB PCI128
Bunch of USB devices

When trying to run CPU burn, it terminates approximately 20-30 seconds into the burn. The temp reaches about 46-67 degrees.

Can anybody enlighten me as to why it's terminating?

Lee (3) · Jul 22, 2003

My only guess mate is that your system isn't stable at the overclocked speed, try upping the core voltage on the processor, what memory rating is it? i.e. pc100 or pc133 cause if its pc100 then clocking to 120fsb could be the problem.

On Tue, 22 Jul 2003 06:04:20 GMT, "Jerry Polyak"
had the will to write:

Hi,

Running ST6R
Cel 1.3 @120 = 1560 MHz
256 MB Crucial RAM
GF3TI 500
SB PCI128
Bunch of USB devices

When trying to run CPU burn, it terminates approximately 20-30 seconds into the burn. The temp reaches about 46-67 degrees.

...

----
Lee

Jerry Polyak · Jul 22, 2003

The memory is PC133. Its fine (Tested with Memtest86). Except for the CPU Burn, everything else is running stable.

"Lee" wrote:

My only guess mate is that your system isn't stable at the overclocked speed, try upping the core voltage on the processor, what memory rating is it? i.e. pc100 or pc133 cause if its pc100 then clocking to 120fsb could be the problem.

On Tue, 22 Jul 2003 06:04:20 GMT, "Jerry Polyak"
had the will to write:

Hi,

Running ST6R
Cel 1.3 @120 = 1560 MHz
... into the burn. The temp reaches about 46-67 degrees.

Can anybody enlighten me as to why it's terminating?

----
Lee

TomG · Jul 22, 2003

is that 1.3 Cel an older style PIII based Cel? if so, 67 C is pretty warm for that cpu...

Jerry Polyak · Jul 22, 2003

Sorry Tom, it's a typo. Should be 46-47 degrees. After fiddle-f**king with it today and trying to up the voltages (I usually run it at stock 1.5v) to 1.725 the only result is higher temps (54-57 C) and it still terminates after a few seconds.

"TomG" wrote:

is that 1.3 Cel an older style PIII based Cel? if so, 67 C is pretty warm for that cpu...

--

Thomas Geery
Network+ certified

ftp://geerynet.d2g.com
ftp://68.98.180.8 Abit Mirror <----- Cable modem IP
This IP is dynamic so it *could* change!...
over 113,000 FTP users served!
...

TomG · Jul 22, 2003

I'm not sure how much I'd sweat it if the system was stable in all other respects...

0_Qed · Jul 22, 2003

Jerry Polyak wrote:

Sorry Tom, it's a typo.

Machugnah clutz !!!

Qed.
<chort><guffaw>

Jens C. Hansen [Odense] · Jul 23, 2003

Jerry Polyak wrote:

When trying to run CPU burn, it terminates approximately 20-30 seconds into the burn.

Does CPUburn also do that, if the system is not overclocked?

Jerry Polyak · Jul 23, 2003

"Jens C. Hansen [Odense]" wrote:

Jerry Polyak wrote:

When trying to run CPU burn, it terminates approximately 20-30 seconds into the burn.

Does CPUburn also do that, if the system is not overclocked?

Yep!

Spajky · Jul 23, 2003

On Wed, 23 Jul 2003 07:20:30 GMT, "Jerry Polyak"
wrote:

"Jens C. Hansen [Odense]" wrote:

Jerry Polyak wrote:

When trying to run CPU burn, it terminates approximately 20-30 seconds into the burn.

Does CPUburn also do that, if the system is not overclocked?

Yep!

try to uncheck some parts of Sandra BurnIn wizard to localite the problem!

-- Regards, SPAJKY
- http://freeweb.siol.net/jerman55/HP/Spajky.htm
Celly-III OC-ed,"Tualatin on BX-Slot1-MoBo!"
E-mail AntiSpam: remove ##

Jerry Polyak · Jul 23, 2003

It's CPUburn. I don't use Sandra.

"Spajky" <Spajky##@volja.net> wrote:

try to uncheck some parts of Sandra BurnIn wizard to localite the problem!

-- Regards, SPAJKY
- http://freeweb.siol.net/jerman55/HP/Spajky.htm
Celly-III OC-ed,"Tualatin on BX-Slot1-MoBo!"
E-mail AntiSpam: remove ##