SuperMicro X10DAI RAM Population

Discussion in 'Supermicro' started by Jackal, Nov 16, 2021.

  1. Jackal

    Jackal

    Joined:
    Nov 16, 2021
    Messages:
    1
    Likes Received:
    0
    Hi all,

    I just became an owner of an X10DAI. It came with 6 modules of DDR4 RDIMMS and I am trying to find out what is the optimum way to install the memory RAM in the motherboard.

    Could someone also give some hint what is the "Fill First" method that the manual describes is? And is the following correct?

    ---------------------- DIMM_00 ------- DIMM_02
    Channel_00 --> P1-DIMMA1 & P1-DIMMA2
    Channel_01 --> P1-DIMMB1 & P1-DIMMB2
    Channel_02 --> P1-DIMMC1 & P1-DIMMC2
    Channel_03 --> P1-DIMMD1 & P1-DIMMD2


    Channel_00 --> P2-DIMME1 & P2-DIMME2
    Channel_01 --> P2-DIMMF1 & P2-DIMMF2
    Channel_02 --> P2-DIMMG1 & P2-DIMMG2
    Channel_03 --> P2-DIMMH1 & P2-DIMMH2

    Screenshot 2021-11-16 at 23.54.05.png
     

    Attached Files:

    Last edited: Nov 16, 2021
    Jackal, Nov 16, 2021
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. RAM Population with S2895 K8WE

  2. Xin Supermicro thread...

  3. SuperMicro X9SCA-F memory problem

  4. Supermicro X8ST3-F boot SAS with SATA RAID

  5. Front Panel Ribbon Cable (Supermicro Chassis)

  6. Supermicro H8WME-2+ OS installation failure

  7. Supermicro X10DAi with Nvidia Grid K1

  8. Supermicro H8SCM-F BSOD with 64GB Mushkin RAM but not with 32GB, why?

Loading...