You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
tomg att please help
- Thread starter T.F
- Start date
- Status
- Not open for further replies.
"T.F" wrote:
Define boot problems. Does it freeze, spontaneously reboot, lock loading Windows, what?
Such problems are often symptoms of a faulty or underpowered psu. A list of your hardware would help.
Another likely culprit is ram. Are your settings all by SPD? All GAT settings at auto?
You can try raising the CAS from 2 to 2.5 or 3, and increasing the voltage one notch on both the cpu and DDR.
I still got my IC7-G board and still having boot up problems..i allways works good after reset!!! Why? i bought a new case if the other was faulty but theres ni differnce... what can i do?
Define boot problems. Does it freeze, spontaneously reboot, lock loading Windows, what?
Such problems are often symptoms of a faulty or underpowered psu. A list of your hardware would help.
Another likely culprit is ram. Are your settings all by SPD? All GAT settings at auto?
You can try raising the CAS from 2 to 2.5 or 3, and increasing the voltage one notch on both the cpu and DDR.
Hi!
We I Got:
Intel P4 3.0 Ht 800
Corsair xms 3500 434 Mhz 2x256 MB
Nvidia quadro 550 Xgl
Midiman Delta 44 Soundcard
Seagate serial ATA 160 GB
(running Win xp pro o)
Godd powersupply ( new one and the other was good but too noisy) The problems is when i start the pc it cant find my hd so it cant boot when i reset it starts and it never hangs or so its not a big problem but i built pc for 10 years now and i think this is strange. Tommy
"Skid" skrev i meddelandet
We I Got:
Intel P4 3.0 Ht 800
Corsair xms 3500 434 Mhz 2x256 MB
Nvidia quadro 550 Xgl
Midiman Delta 44 Soundcard
Seagate serial ATA 160 GB
(running Win xp pro o)
Godd powersupply ( new one and the other was good but too noisy) The problems is when i start the pc it cant find my hd so it cant boot when i reset it starts and it never hangs or so its not a big problem but i built pc for 10 years now and i think this is strange. Tommy
"Skid" skrev i meddelandet
"T.F" wrote:
I still got my IC7-G board and still having boot up problems..i allways works good after reset!!! Why?
i bought a new case if the other was faulty but theres ni differnce... what can i do?
Define boot problems. Does it freeze, spontaneously reboot, lock loading Windows, what?
Such problems are often symptoms of a faulty or underpowered psu. A list of your hardware would help.
Another likely culprit is ram. Are your settings all by SPD? All GAT settings at auto?
You can try raising the CAS from 2 to 2.5 or 3, and increasing the voltage one notch on both the cpu and DDR.
Could he set a delay IDE in the BIOS? This delays for a user selected number of seconds to allow drives to "come ready".
Just a thought,
Mike
"TomG" wrote:
Just a thought,
Mike
"TomG" wrote:
differnce...almost sounds like the hard drive isn't coming ready in time for the first boot. have you run any kind of drive fitness test on the drive? look to the manufacturer for a software bundle to test the drive.
--
Thomas Geery
Network+ certified
ftp://geerynet.d2g.com
ftp://68.98.180.8 Abit Mirror <----- Cable modem IP
This IP is dynamic so it *could* change!...
...
loadingwhat can i do?
Define boot problems. Does it freeze, spontaneously reboot, lock
Windows, what?
Such problems are often symptoms of a faulty or underpowered psu. A list of
your hardware would help.
Another likely culprit is ram. Are your settings all by SPD? All GAT settings at auto?
You can try raising the CAS from 2 to 2.5 or 3, and increasing the voltage one notch on both the cpu and DDR.
...
could always disable the quick POST
Trev
"TomG" wrote:
Trev
"TomG" wrote:
yeah, I can't remember if this board has that setting available or not...
--
Thomas Geery
Network+ certified
ftp://geerynet.d2g.com
ftp://68.98.180.8 Abit Mirror <----- Cable modem IP This IP is dynamic so it *could* change!...
over 117,000 FTP users served!
^^^^^^^
... but i
built pc for 10 years now and i think this is strange. Tommy
"Skid" skrev i meddelandet
"T.F" wrote:
I still got my IC7-G board and still having boot up problems..i allways
... A list
of
your hardware would help.
Another likely culprit is ram. Are your settings all by SPD? All GAT settings at auto?
You can try raising the CAS from 2 to 2.5 or 3, and increasing the voltage
one notch on both the cpu and DDR.
...
It does, and the OP should certainly give it a try.
"TomG" wrote:
"TomG" wrote:
yeah, I can't remember if this board has that setting available or not...
--
Thomas Geery
Network+ certified
ftp://geerynet.d2g.com
ftp://68.98.180.8 Abit Mirror <----- Cable modem IP This IP is dynamic so it *could* change!...
over 117,000 FTP users served!
^^^^^^^
... but i
built pc for 10 years now and i think this is strange. Tommy
"Skid" skrev i meddelandet
"T.F" wrote:
I still got my IC7-G board and still having boot up problems..i allways
... A list
of
your hardware would help.
Another likely culprit is ram. Are your settings all by SPD? All GAT settings at auto?
You can try raising the CAS from 2 to 2.5 or 3, and increasing the voltage
one notch on both the cpu and DDR.
...
Hi!
Well it works now since i flash bios again and try delay!!! Thanks for you help everybody!!!! Take care! Tommy
"TomG" skrev i meddelandet
Well it works now since i flash bios again and try delay!!! Thanks for you help everybody!!!! Take care! Tommy
"TomG" skrev i meddelandet
Allcool... I just haven't rebooted and gone into the bios to take a look first hand. agree that the OP should try that option.
--
Thomas Geery
Network+ certified
ftp://geerynet.d2g.com
ftp://68.98.180.8 Abit Mirror <----- Cable modem IP This IP is dynamic so it *could* change!...
over 118,000 FTP users served!
^^^^^^^
... selected number of seconds to allow drives to "come ready".
Just a thought,
Mike
"TomG" wrote:
almost sounds like the hard drive isn't coming ready in time for the first
boot. have you run any kind of drive fitness test on the drive? look to
the manufacturer for a software bundle to test the drive.
--
Thomas Geery
Network+ certified
ftp://geerynet.d2g.com
... cant boot
when
i reset it starts and it never hangs or so its not a big problem but
i
built pc for 10 years now and i think this is strange. Tommy
"Skid" skrev i meddelandet
"T.F" wrote:
I still got my IC7-G board and still having boot up ... lock loading
Windows, what?
Such problems are often symptoms of a faulty or underpowered psu. A
list
of
your hardware would help.
Another likely culprit is ram. Are your settings all by SPD?
GAT
settings at auto?
You can try raising the CAS from 2 to 2.5 or 3, and increasing the voltage
one notch on both the cpu and DDR.
...
"T.F" wrote:
Good news. Enjoy.
Hi!
Well it works now since i flash bios again and try delay!!! Thanks for you help everybody!!!! Take care! Tommy
Good news. Enjoy.
- Status
- Not open for further replies.
Latest threads
-
-
-
MSI X470 gaming plus V3/V4 bios spilt water on the board..don't boot through jumper sometimes....
- Started by jspinks231
- Replies: 0
-