USB over current detected

Discussion in 'Asus' started by RedLamp, Oct 19, 2009.

  1. RedLamp

    RedLamp

    Joined:
    Oct 19, 2009
    Messages:
    1
    Likes Received:
    0
    The last thing I did while my computer was running fine was check if my NIC was in its slot. The computer was on and I wiggled it a little. I shut down, inserted the NIC card and rebooted. The next thing that appears is the "USB over current detected shutdown in 15 seconds".

    I tried clearing the BIOS by removing the CMOS, also by using the CLR jumpers.

    I'm at a loss and am wondering if I am going to be buying a new mobo?

    Hopefully someone will have a suggestion.
     
    Last edited: Oct 19, 2009
    RedLamp, Oct 19, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SATA drive not detected after installing 2 IDE drives

  2. K7T Turbo MSI-6330 - No Audio Device Detected!!! ARRRRRG!!!

  3. over clocking amd athlon 64x2 3800 + duel core processor

  4. Hard Drive Not Detected - Help!

  5. over clocking msi 7191

  6. Has anyone connected several ACS712 Current Sensors with a Wemos D1?

  7. Z170-A starts and stops over and over?

  8. Un-Correctable DRAM ECC Error Detected

Loading...