Weird acting power-on button and AN19E

Discussion in 'FIC' started by Paul T. Winkfield, Apr 12, 2004.

  1. Hi All,

    I have a AN19E that has the latest BIOS, from a warranty repair. the
    power-on works like this:

    (A) Very, very soft touch = great bootup (I may have to try this twice cuz
    if I push too hard 'B' happens

    (B) Push button till you hear click = everything powers up but a long beep,
    blank screen, and no WinXP

    (C) Push till hear click and hold 4 seconds = system will powerup then power
    down (this is correct action as per manual)

    Are those of you using this board have the same problem, is there a BIOS
    setting I should look into?

    Otherwise the system runs fast and stable.
    Paul T. Winkfield, Apr 12, 2004
    1. Advertisements

  2. Try playing around with the BIOS --> Power Management --> Power Button Function
    setting, see if that makes any difference.

    Alex Zorrilla, Apr 12, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.