1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

Wireless Netgear WG311T "108mbs" chipset atheros, help me for drivers Freebsd 5.2.1

Discussion in 'Hardware' started by white_wolf, Jun 23, 2004.

  1. white_wolf

    white_wolf Guest

    Hi every one!!


    Is someone could tell me how to make work my wireless card netgear
    WG311T on freebsd 5.2.1 for the standards 802.11g "108mbs" ?????

    I lose hope to find the drivers for my wireless card !!! I had been
    on the web to inform me, and I had seen that the chipset atheros be
    suppoted by freebsd 5.2 .
    I saw that the drivers would be already build for the chipsets
    atheros, for the standards 802.11g on freebsd 5.2.1!! Then if someone
    could guide me to help me it'll be very nice, because I had a AP in
    802.11b and I wanted to test the wifi in 108mbs thank you of your
    assistance......


    look below of my configuration
    "dmesg | grep -i ath "
    "ifconfig -a"

    wifi# dmesg | grep -i ath
    CPU: AMD Athlon™ XP 2400+ (1998.32-MHz 686-class CPU)
    npx0: <math processor> on motherboard


    wifi# ifconfig -a
    fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 ether
    02:40:ca:09:22:0f ch 1 dma -1
    xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=b<RXCSUM,TXCSUM,VLAN_MTU> inet 192.168.2.10 netmask 0xffffff00
    broadcast 192.168.2.255
    inet6 fe80::201:3ff:fe2a:3130%xl0 prefixlen 64 scopeid 0x2 ether
    00:01:03:2a:31:30
    media: Ethernet autoselect (100baseTX)
    status: active
    xl1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
    options=b<RXCSUM,TXCSUM,VLAN_MTU> ether 00:01:03:2a:2d:c1
    media: Ethernet autoselect (none)
    status: no carrier
    plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet
    127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 wifi#

    xl0 et xl1 Network card 3com
    fwe0 firewire


    White_wolf
     
    white_wolf, Jun 23, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.