Asus Prime AP201 TG – how to connect the front panel to the Maximus IV Gene-Z/Gen3 board?

Discussion in 'Asus' started by intusker64, Nov 15, 2025.

  1. intusker64

    intusker64

    Joined:
    Nov 15, 2025
    Messages:
    1
    Likes Received:
    0
    Hello everyone.
    I'm asking for help connecting the front panel of a new case to an older motherboard.
    The Asus Prime AP201 TG MicroATX case has a front panel with this connector (f-panel), but on the Asus Maximus IV Gene-Z/Gen3 motherboard, the connection pins are unfortunately in a different "form."
    I have individual wires that I can connect individually, but I can't identify which wire in the plug is for what (besides the visible triangle, which is supposedly a positive).
    I'm attaching photos of the pins on the motherboard, the connectors from the case, and a photo from the manual.
    I'd appreciate your help. Instrukcja obudowa.jpg Płyta piny.jpg Złącza obudowy.jpg
     
    intusker64, Nov 15, 2025
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. maximus extremus board, blank screen startup

  2. Maximus III gene

  3. Intel SE7520AF2 Server Board Front Panel

  4. Supermicro H11SSL-NC & Samsung PM1725a NVMe SSD, 1.6 TB, Interface: PCI Express Gen3 x8

  5. Can I use a SSD drive with an ASUS PZ68 Delux-Gen3?

  6. Asus Maximus - USB C Monitor Audio - No Audio on Motherboard Rear Panel

  7. 5.1 optical out on Maximus VIII Gene - Ubuntu

  8. Help ASUS PT6 front panel audio driver circa 2010

Loading...