Case fan jacks?

Discussion in 'Gigabyte' started by sepulchre, Feb 5, 2008.

  1. sepulchre

    sepulchre

    Joined:
    Feb 5, 2008
    Messages:
    2
    Likes Received:
    0
    Hi all!

    I have a GA-P35-DS3L that I'm building my new PC around. I know this is probably a dumb noob question but hey, gotta start somewhere.
    On the board there are three fan jacks: two called SYS_FAN 1&2, and one called PWR_FAN. What's the difference and which should I use to connect my two fans?

    I tried contacting Gigabyte but it's Chinese New Year from Feb. 6th to the 11th and they won't answer any mail until after that.

    I'd appreciate any help I can get on this.
    Thanks!
    Ken
     
    sepulchre, Feb 5, 2008
    #1
  2. sepulchre

    sepulchre

    Joined:
    Feb 5, 2008
    Messages:
    2
    Likes Received:
    0
    Well I found the pinouts I needed and figured out that SYS_FANS are for the case fans. I guess the PWR_FAN connection is for PSU fan speed control. In any event, I all set.
    Sorry for the bother,
    Ken
     
    sepulchre, Feb 6, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. FIC VA503+ Windows 98SE Shut Down Problem in AT Case

  2. Using a Dell Dimension 3100 BTX case with a Gigabyte (IBM) motherboard

  3. Deskpro EN SFF: how to open case?

  4. Sound card w/ 6.5mm (1/4") jacks

  5. motherboard fitting in my computer case... PLEASE HELP!

  6. upgrading computer in old hp 514n case

  7. Why would a Mobo not post inside the case?

  8. dell mb d925xyt in new case

Loading...