Help with Q6600 OC'ing

Discussion in 'Technical Support' started by tony.coner, Feb 3, 2008.

  1. tony.coner

    tony.coner

    Joined:
    Feb 3, 2008
    Messages:
    3
    Likes Received:
    0
    So I just finished some overclocking now, and I can boot into Windows at 3005.9GHz. Problem is, that's my BIOS settings at 334 x9. CPU-Z shows my multiplier at x6 and it switches between x6 and x9 at least 2-4 times a minute. What's up with that? I've disabled any power saving features in my BIOS that might be doing that. I am so confused. Also, when I went into my bios, it shows my memory frequency at 800MHz instead of 1066. What the hell am I doing wrong?

    Also, my System settings from the Control Panel show me at 3.01GHz. So I don't know if CPU-Z is messing up or what. Any help is appreciated.


    Edit:
    Reading up on other forums is making me think I have C1E or IEST enabled. I know I have C1E disabled, but in my BIOS I didn't see ANYthing relating to Intel's Enhanced Speedstep Technology.
     
    tony.coner, Feb 3, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Need Help with NVRAID Setup on ECS KN1 Extreme

  2. Problem with P5P800 and booting with sata drive

  3. Help with a poorly X5DA8 please...

  4. Help with 7njl6 manual??

  5. MSI 6741 HELP with SATA setup

  6. Help with connecting with the Inspiron B120

  7. SATA boot query with 2 drives installed with OS's

  8. Supermicro H8SCM-F BSOD with 64GB Mushkin RAM but not with 32GB, why?

Loading...