Motherboard MCP73PVT-PM 12v ATX Problem

Discussion in 'Packard Bell' started by Yuva, Oct 18, 2012.

  1. Yuva

    Yuva

    Joined:
    Oct 18, 2012
    Messages:
    1
    Likes Received:
    0
    Hi everyone,

    I have a Packardbell desktop, it has following specs.
    Processor: Intel Pentium Dual Core
    RAM: 8G DDR2 667
    Motherboard: MCP73PVT-PM

    The problem is that, when I connect the 12v ATX 4 pin cabel into its socket and power on the desktop, it turns off immediately. I remove the 12v ATX cable and power on, it turns on but there is no display on the monitor.

    I'm not sure the problem is with motherboard or the processor. Can anyone help with this problem.

    Thank you.
     
    Yuva, Oct 18, 2012
    #1
  2. Yuva

    revotan

    Joined:
    Jun 19, 2012
    Messages:
    15
    Likes Received:
    0
    Does your video card need a four pin cable from the power supply?
     
    revotan, Oct 31, 2012
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Fans Spin with 24-pin, 12v Causes Stop

  2. Please help recommend a 600w+ PSU with 30amp on the 12V rail!!

  3. ABIT AN52 Socket AM2 NVIDIA nForce 520 MCP Onboard Video ATX Abit Motherboard

  4. Abit AW9D LGA775 975X DDR2 800 Crossfire ATX Abit Motherboard

  5. ATX 12V 8pin connector wont power CPU

  6. 14v 3a adaptor powering a 12v 3.5a monitor...is it safe?

  7. ASUS PRIME B450M-A/CSM AM4 AMD B450 SATA 6Gb/s USB 3.1 HDMI Micro ATX AMD Motherboard | Question

  8. 12v rail showing 5v or less in BIOS

Loading...