Need Help by Recover to a Supermicro System

Discussion in 'Supermicro' started by Shamen1001, Aug 11, 2018.

  1. Shamen1001

    Shamen1001

    Joined:
    Aug 11, 2018
    Messages:
    1
    Likes Received:
    0
    Hello together,

    I try to change our Intel Server (Intel_S1200BTL Board, Server 2012R2 Bios) to a new Supermicro Server (X11DPi-N). I make a full Backup of the old Server with Acronis Backup and Restore Server Edition. Next I make a Full Rcovery on the Supermicro Server. There are two seperate Harddrives configured as a Raid 1. I have the same configuration on the new Server. The first boot try fails, OK so I use Acronis Universal Restore to give him the Raid Controller Driver. What I try nothing works, Maybe I try not the right Drivers.
    Does someone has an Idea, what I can do, I only have tomorrov, after that I must wait another two weeks to try it again.

    I try to make a new Windows Server 2016 Install on the Supernmicro System, and without a spezial Driver, it is not possble to Install.
    I hope someone can help me.
     
    Shamen1001, Aug 11, 2018
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. HELP!!! System auto boots.....

  2. cannot recover 6420nx with recovery disks

  3. HP 700 Can't perform system recover.

  4. How can i recover my data From dead hard disk

  5. Toshiba Satalite A200 BIOS Password Recover

  6. Supermicro X7DCL-i-DL0006 System Status LED is yellow

  7. Asus motherboard P8B75-M sometimes ask for F1 to go into BIOS to recover BIOS Setting in Power up

  8. Need to rest web admin for Supermicro M11SDV-8C-LN4F

Loading...