Problems with mobo (i think)

Discussion in 'Asus' started by trukshavad, Jul 14, 2008.

  1. trukshavad

    trukshavad

    Joined:
    Jul 13, 2008
    Messages:
    3
    Likes Received:
    0
    So i have a ASUS P5VDC-X mobo which worked great. Then i decided to clean the parts, removing dust and such so i removed all the parts and when i put them back the computer wont start. When i try to turn it on it gets power (the CPU and PSU fans start spinning) but then instantly turns off (fans stop spinning).

    I tried plugging in the PSU in another computer and it works fine, as does the CPU so those are fine. The RAMs are ok aswell so i came to the conclusion that the mobo is at fault. I can not figure out what it is. The only clue i have is that fter i had cleaned it and put back all th parts i had a Jumper left over but after hours of trying different stuff it doesnt work so i figured it was nothing important.

    Does anyone have an idea of what may be wrong or is the mobo damaged because of static electricity? (Note that i didnt use any protection against the latter because i havent had to before).

    Thanks in advance.

    EDIT: I read some other guys thread (the "no power" thread) and i basically have the same problem but i dont have a case, actually i havent used a case for maybe one year with this computer and it still has worked fine until now.

    How do check if the mobo is fried?
     
    trukshavad, Jul 14, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.