Supermicro config - Valid Config ?

Discussion in 'Technical Support' started by rhdmsw, Dec 7, 2022.

  1. rhdmsw

    rhdmsw

    Joined:
    Dec 7, 2022
    Messages:
    2
    Likes Received:
    0
    Hi,
    have an issue with a config that was sent to us for testing. Hopefully someone can answer if this is a valid config and using proper Backplane, HBA and NVMe for the config.

    Motherboard: X11DPI-N | Motherboards | Products | Supermicro
    Backplane: BPN-SAS3-LA26A-N12.pdf (supermicro.com)
    HBA - Broadcom 9500-16i Tri-mode
    Micron NVMe 7400

    having an issue even getting the system to recognize the NVMe with Firmware 22 with VMware Vsphere 7.0 U3 and vSAN 7.0

    trying to figure out if this config from Supermicro supports the Broadcom 9500-16i with the Micron NVMe 7500 x 4

    Thanks,
    Rich
     
    rhdmsw, Dec 7, 2022
    #1
  2. rhdmsw

    rhdmsw

    Joined:
    Dec 7, 2022
    Messages:
    2
    Likes Received:
    0
    Sorry,
    on above config NVMe is actually Micron 7400
    thanks,Rich
     
    rhdmsw, Dec 7, 2022
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. P4P800 SE Memoery Config.

  2. p5b-vm raid-1 -- JMICRON attachements and config

  3. SATA Config Problem!!!

  4. Auto Restart Config on P6LX-A Needed

  5. GA-7VT600 1394 max ram config/setup

  6. MOH install issues- ea site says code not valid

  7. Cannot find RAID array after config in BIOS X11DPG-QT

  8. M5a78l-m/usb3 no jumperfree config on bios setting

Loading...