supermicro X9DRi-LN4F+ not booting

Discussion in 'Technical Support' started by jgrade, Aug 31, 2019.

  1. jgrade

    jgrade

    Joined:
    Aug 31, 2019
    Messages:
    1
    Likes Received:
    0
    Hello guys,

    I have a strange issue with my X9DRi-LN4F+ as you can see in the video bellow

    Nothing on the screen
    tests done:
    removed all memory - beep changed to the correct sequence when you don't have memory
    removed CPU power - same beep as in the video

    Power supply: Zalman ZM1000-GVM - 1000W
    CPU: Set of 2x Intel® Xeon® Processor E5-2650L v2 25M Cache, 1.70 GHz
    Memory: Hynix HMT42GR7MFR4A-H9 16GB DIMM (checked and it's compatible with the board)
     
    Last edited: Aug 31, 2019
    jgrade, Aug 31, 2019
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. M2NBP-VM not booting after SATA controller card added

  2. m/b not booting

  3. after connecting new smps motherboard is not booting

  4. Asua f3f not booting

  5. P5W DH Deluxe not booting, no beeps but the green light is on and fans are spinning

  6. Supermicro X9DBL-3F very slow booting with GTX-1060 card installed

  7. Supermicro C7Q270-CB-ML Keeps booting into BIOS

  8. Need to rest web admin for Supermicro M11SDV-8C-LN4F

Loading...