Trying to record from line-in

Discussion in 'Technical Support' started by Morgan19, Dec 9, 2006.

  1. Morgan19

    Morgan19

    Joined:
    Dec 9, 2006
    Messages:
    1
    Likes Received:
    0
    I'm trying to record an audio tape to my computer.

    I have a stereo with a tape deck, with a stereo audio cable running from it to the blue line-in jack in my soundcard (an SB Live!). In Windows' sound properties, I've selected "Line In" as the recording source, but when I start up CoolEdit and try to record the tape as it's playing, nothing is recorded. I've used my own common sense and then followed directions online to set this up properly, so I'm not exactly sure why it's not recording right.

    (Everything else works fine-- I usually have the stereo hooked up to the line-out so they act as my computer speakers, and I'm able to record "what u hear" in the sound properties, like off a website or whatnot.)

    Any ideas?

    m19
     
    Morgan19, Dec 9, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Realtek Line-In Audio only recording Left Channel

  2. Is -5V line used for anything in ATX connector

  3. Trying to upgrade GX620 processor

  4. Compaq Presario CQ70 Blue screen when trying to play DVDs

  5. Compaq Presario CQ70 Blue screen when trying to play DVDs

  6. Adobe Acrobat (CS3) freezes trying to scan from HP

  7. Trying to get S2518 working with add-on PCI video card

  8. Issues trying to get motherboard to start up....

Loading...