What happened to my SATA drive...

Discussion in 'Technical Support' started by lgscheurich, Jan 20, 2011.

  1. lgscheurich

    lgscheurich

    Joined:
    Jan 20, 2011
    Messages:
    1
    Likes Received:
    0
    I have a Fry's PC that was built by them with best of breed parts a couple of years ago. I have a mix of SATA and IDE drives in the computer. A couple of nights ago, the power supply started making a funny noise and smell. I was able to shutdown the computer just fine. I swapped out the power supply and re-attacheda all of the cables. The drives and cables are fine. No matter what I do, I can't get the BIOS to recognize the drives. My BIOS is Phoenix 6.00PG. These drives worked just fine, so I suspect the hardware is fine. No matter what I try in the Integrated Peripherals section of the BIOS, it won't pick up the SATA drives. What else should I be doing?

    Thanks!
    Larry
     
    lgscheurich, Jan 20, 2011
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SATA drive not detected after installing 2 IDE drives

  2. Problem with P5P800 and booting with sata drive

  3. PT800CE-A not recognizing SATA drive

  4. creating a normal drive on a sata raid connector?

  5. No hard drive found when installing xp on new drive

  6. What are BIOS mods and what are they intended for?

  7. Add external SATA drive to SATA RAID 1

  8. What are Emulations for Sata Used ?

Loading...